MoT-thermA1

For projects with higher thermal insulation requirements

MoT-thermA1

For projects with higher thermal insulation requirements

RR-thermA1

Roof panel

Roof panel

RWs-thermA1

Wall with Standard joint

Wall with Standard joint

RW-thermA1

Wall with secret joint

Wall with secret joint

MoT–thermA1 series obtains the best combination of mechanical performance and low thermal transmittance rate, while maintaining the competitive advantage of the highest non combustible class A1.
rr-thermal

The self-supporting fireproof sandwich panels  MoT- RR – thermA1  are constructed of two steel skins, the outer skin has 5 Ribs. Their thickness are  ≥ 100 mm and with the usage of a special type of rockwool core (95Kgr/m³density) it is achieved to obtain high inertial properties combined with  low thermal conductivity properties λ: 0.037W/m2K.They can be applied for roof-with a minimum slope of 5% in the case of one-piece panel coverage & 7% when covering two or more panels connected to each other by overlapping-  and wall cladding.

rws-thermal

The self-supporting fireproof sandwich panels  MoT- RWs – thermA1  are constructed of two steel skins, their thickness are  ≥ 100 mm. With the usage of a special type of rockwool core (95Kgr/m³density) it is achieved to obtain high inertial properties combined with low thermal conductivity properties λ: 0.037W/m2K.They can be applied for wall cladding (either horizontally or vertically positioning) with exposed fastening.

rw-thermal

The self-supporting fireproof sandwich panels  MoT- RW – thermA1  are constructed of two steel skins, their thickness are  ≥ 100 mm. With the usage of a special type of rockwool core (95Kgr/m³density) it is achieved to obtain high inertial properties combined with low thermal conductivity properties λ: 0.037W/m2K.They can be applied for wall cladding (either horizontally or vertically positioning) with consealed fastening.