MoT-Acoustic

Developed to fulfill,  sound insulation as well as  sound absorption requirements

MoT-Acoustic

Developed to fulfill,  sound insulation as well as  sound absorption requirements

RR-Acoustic

Roof panel

Roof panel

RWs-Acoustic

Wall with Standard joint

Wall with Standard joint

RW-Acoustic

Wall with secret joint

Wall with secret joint

certifications_Box5

Every sound-absorbing panel of MoT-acoustic series bearing inner perforated steel sheet, with its percentage and type of perforation to depend on the particular technical requirements of each project. Between the rockwool core and the perforated steel plate is applied a fiberglass sheet of black color in order to prevent rockwool fibers escaping and their suspension inside the building.To achieve better sound absorption it is used  rockwool core of 90-100Kgr / m³ density .

acoustic-rr

The self-supporting sandwich Sound Absorbent Panels (RR-a) are constructed of two steel skins, the outer skin has 5 trapezoidal ribs, the inner sheet is perforated  and between them it is placed the rockwool core of 90-100Kgr/m³ density.They can be applied for roof cladding, and wall cladding as well, by turning the side of the perforated sheet to the noise hob. They provide high sound absorption properties  in combination to sound and thermal insulation, fire resistance and perfect sealing.  

acoustic-rws

The self-supporting sandwich Sound Absorbent Panels MoT- RWs- acoustic are constructed of two steel skins, the inner sheet is perforated and between them it is placed the rockwool core of 90-100Kgr/m³ density.They can be applied for wall cladding (either horizontally or vertically positioning), also applied for  suspended ceiling structure, with exposed fastening.  Always by turning the side of the perforated sheet to the noise hob they provide high sound absorption properties in combination to sound and thermal insulation, fire resistance and perfect sealing.

acoustic-rw

The self-supporting sandwich Sound Absorbent Panels MoT- RW- acoustic are constructed of two steel skins, of which one side of the metal sheet is perforated. The perforated side could be either the metal sheet side where fasteners would be placed or the other side that it would be fasteners –free.  Between these two metal sheets it is placed the rockwool core of 90-100Kgr/m³ density.They can be applied for wall cladding (either horizontally or vertically positioning), with consealed fastening.  The side of the perforated sheet should be always turned to the noise hob.